310S Stainless Steel Coil: Specifications, Properties, Surface Finishes and Buying Guide

310S Stainless Steel Coil: Specifications, Properties, Surface Finishes and Buying Guide

310S Stainless Steel Coil: Specifications, Properties, Surface Finishes and Buying Guide
2026.09.10
Share:

310S stainless steel coil is a high-alloy austenitic stainless steel designed for applications that require good oxidation resistance, corrosion resistance, and reliable performance at elevated temperatures. With its high chromium and nickel content, 310S stainless steel provides stronger high-temperature performance than many commonly used stainless steel grades.

Shaanxi Shunchengtian supplies 310S stainless steel coil for industrial processing, fabrication, equipment manufacturing, and international distribution. Depending on project requirements, the coil can be supplied in different thicknesses, widths, surface finishes, and edge conditions.


310S Stainless Steel Coil Specifications


310S stainless steel coil is commonly identified by Grade 310S, EN 1.4845, and UNS S31008. The material is available in both standard and customized dimensions for different processing requirements.


Item310S Stainless Steel Coil
Product Name310S Stainless Steel Coil
Grade310S / 1.4845 / UNS S31008
Material TypeAustenitic Stainless Steel
Thickness0.02–6.0 mm
Width1.0–1500 mm
EdgeSlit Edge / Mill Edge
Surface FinishNo.1, 2B, 2D, BA, HL, Brushed, 6K, 8K Mirror, etc.
HardnessApprox. 150–200 HV, depending on condition
Coil CoreStandard or customized internal diameter
PackagingWooden Pallet / Wooden Case
SampleAvailable upon request


For custom orders, buyers should provide the required thickness, width, quantity, surface finish, edge type, and delivery requirements so the appropriate coil specification can be confirmed.


310S Stainless Steel Coil Chemical Composition


The chemical composition of 310S is one of the main reasons for its high-temperature performance. The grade contains a relatively high percentage of chromium and nickel compared with general-purpose stainless steels.


Element310S Typical Requirement (%)
C≤0.08
Si≤1.50
Mn≤2.00
P≤0.035
S≤0.030
Cr24.00–26.00
Ni19.00–22.00


The combination of chromium and nickel contributes to the alloy's oxidation resistance and stability at elevated temperatures. The low carbon content also makes 310S a practical choice for applications where welding and high-temperature service are involved.


310S Stainless Steel Coil Mechanical Properties


The mechanical properties of 310S stainless steel coil depend on its supply condition and processing history. Annealed material offers a useful combination of strength, ductility, and formability.

Typical values associated with the reference specification include:


PropertyTypical Value
Yield Strength≥205 MPa
Tensile Strength≥515 MPa
Elongation≥40%
HardnessApprox. 150–200 HV
ConditionAnnealed


For applications involving forming, cutting, stamping, or other downstream processing, the actual material certificate should be checked before production.


Why Choose 310S Stainless Steel Coil?


The main advantage of 310S is its ability to maintain useful performance in high-temperature environments. Its high chromium content supports oxidation resistance, while its nickel content helps maintain the stability of the austenitic structure.

Compared with standard stainless steel grades used mainly for general corrosion resistance, 310S is better suited to applications where heat, oxidation, and corrosion resistance need to be considered together.

Other useful characteristics include:

  • Good oxidation resistance
  • Good corrosion resistance
  • Good high-temperature performance
  • Good weldability
  • Good ductility and toughness
  • Good processing performance
  • Suitable for high-temperature industrial equipment
  • Available in a wide range of surface finishes

The actual performance of 310S depends on temperature, atmosphere, load, processing condition, and service environment, so material selection should always be based on the complete application.


What Are the Applications of 310S Stainless Steel Coil?


Because of its high-temperature performance, 310S stainless steel coil is commonly used in industrial equipment and components exposed to heat.

Typical applications include:

  1. Boiler baffles
  2. Furnace components
  3. Oven linings
  4. Firebox sheets
  5. High-temperature containers
  6. Heat-treatment equipment
  7. Industrial heating systems
  8. Chemical processing equipment
  9. Heat-resistant fabricated components

For manufacturers, using coil rather than pre-cut sheet can also provide greater flexibility in slitting, forming, stamping, and other downstream operations.



What Surface Finishes Are Available for 310S Stainless Steel Coil?


Surface finish is an important purchasing specification because it affects appearance, fabrication, cleaning, and the final application.

Shaanxi Shunchengtian can supply 310S stainless steel coil with finishes such as No.1, 2B, 2D, BA, No.4, HL, brushed, 6K, and 8K mirror, depending on product requirements.

No.1 Finish

No.1 is generally produced through hot rolling followed by heat treatment and pickling. It has a relatively matte, silver-white appearance and is commonly selected for industrial applications where surface appearance is not the main priority.

2B Finish

2B is a common cold-rolled stainless steel finish with a smoother and brighter surface than 2D. It is widely used for general industrial fabrication and applications where a clean, smooth surface is required.

No.4 Finish

No.4 is a polished finish produced using abrasive processing. It provides a more uniform appearance and is often selected for kitchen equipment, architectural products, medical equipment, and decorative applications.

Hairline Finish

HL, or hairline, creates a continuous linear surface pattern. It is frequently used in architectural and decorative applications such as elevators, facades, and interior panels.

BA Finish

BA stands for bright annealed. It provides a bright, reflective surface and is often selected for applications where both material performance and surface appearance are important.

8K Mirror Finish

8K is a highly polished mirror finish with a strong reflective effect. It is mainly used where appearance is a key consideration, including architectural decoration and premium interior applications.


What Are the Edges of 310S Stainless Steel Coil?


310S stainless steel coil is generally available with mill edge or slit edge.

A mill edge is the original edge produced during rolling and processing. It may retain a slightly irregular edge profile.

A slit edge is produced by trimming the coil with a slitting machine. The process removes the irregular edge and provides a cleaner, more controlled strip width.

The choice between mill edge and slit edge depends on the downstream manufacturing process and dimensional requirements.


How to Buy 310S Stainless Steel Coil from China?


When sourcing 310s stainless steel coil from China, buyers should evaluate more than the quoted material price. Supplier capability, product consistency, processing equipment, quality control, and delivery performance can all affect the total purchasing cost.

Before placing an order, confirm the following:

  • Stainless steel grade and applicable standard
  • Required thickness and width
  • Surface finish
  • Mill edge or slit edge
  • Coil weight and core diameter
  • Quantity and MOQ
  • Inspection and material certification
  • Packaging requirements
  • Production lead time
  • Shipping terms and destination port

It is also useful to request product samples, technical documentation, and recent material test certificates before starting a large-volume order.

For long-term purchasing, visiting the supplier's production facility can provide additional insight into its manufacturing equipment, processing capabilities, warehouse management, and quality-control procedures.

Shaanxi Shunchengtian can support buyers with 310S stainless steel coil specifications and customized supply requirements for different industrial applications.


What Is the Standard Sea Packaging of 310S Stainless Steel Coil?


Proper packaging is essential when shipping stainless steel coils internationally. Standard export packaging generally protects the material against moisture, impact, and handling damage during transportation.

A typical export package may include:

Waterproof paper + PVC film + steel strapping + wooden pallet or wooden case

Packaging can also be customized according to the buyer's requirements. Coil orientation, including eye-to-wall or eye-to-sky, can be arranged depending on loading, unloading, and transportation requirements.

For international orders, buyers should confirm the shipping port, packaging method, coil weight, and container loading requirements before shipment.


Choose Shaanxi Shunchengtian for 310S Stainless Steel Coil


For buyers looking for a reliable 310s stainless steel coil supplier, Shaanxi Shunchengtian provides stainless steel coil solutions for industrial and commercial applications. Different dimensions, surface finishes, and edge conditions can be arranged according to specific purchasing requirements.

The right 310S coil should be selected based on its temperature requirements, corrosion environment, fabrication process, surface requirements, and final application rather than price alone.

If you need 310S stainless steel coil for furnace equipment, heat-resistant components, industrial fabrication, or other high-temperature applications, providing the required grade, thickness, width, quantity, and finish will help Shaanxi Shunchengtian prepare a more accurate quotation and supply solution.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.